- Tuned
for use with 2.4 GHz audio/video link systems
- Magnetic
base provides for simple mounting indoors or outdoors
- Use
on either the transmitter or receiver side for a boost in
potential range
- No
electrical voltage required to antenna for its extra gain
(passive)
The
ANT-24M magnetic base antenna helps optimize the
range
potential of 2.4 GHz
wireless
audio/video link systems by providing an easy way to mount the antenna
outdoors. This antenna has 3 dBi gain
and can be set up on the transmitter side, receiver side, or both
for the absolute best signal performance.
The ANT-24M
should not be considered an omni-directional
antenna, but is not nearly as directional
as the ANT-Y24
or ANT-Y24X
yagi
antennas for 2.4 GHz. For this reason, the smaller magnet mount
antenna is more often recommended for short range wireless broadcasts.
Still, this antenna should be facing the antenna on the opposite
side of your wireless transmission, preferably with a pure line
of sight between the two antennas if at all possible due to
the highly directional nature of 2.4 GHz wireless signals.
The antenna
has an SMA
plug for its RF
(radio frequency) output providing very simple plug and play
use with much of the 2.4 MHz wireless equipment found at Eyespyvideo.com.
The ANT-24M
is weatherproof and can be mounted outdoors or indoors with its
built-in magnetic base. Because of its size (6.2" high), the
ANT-24M antenna is not easily hidden for covert transmitter-side
use, but it is a fantastic addition to short and mid-range wireless
video links.
Use this antenna
with the THX-2450,
THX-24X1,
THX-24X2,
and THX-24X4
transmitters. It can also be implemented in combination with the
RX-2410
receiver or MRX-2400
receiver / LCD monitor.